Why has voltage been fluctuating lately? – DTEK Dnipro Grids answers
Most often, fluctuations occur immediately after restoration of the power supply. The main cause is a sharp increase in grid load. Once electricity is restored, the residents switch on boilers, heaters, electric stoves and other high-power appliances almost simultaneously. The grids and building’s internal wiring are not designed for such instant peak; therefore, the voltage temporarily drops. It usually stabilizes within 1–1.5 hours, when consumption levels out. The situation is further complicated by a drop in temperature that significantly increases total consumption.
The second major cause is the targeted destruction of the energy infrastructure by the enemy. Facilities of all levels come under fire – from power generating stations to distribution nodes and grids. Thus, the system sometimes operates incorrectly and may cause both voltage drop and voltage increase, especially during the change of the power circuit (while the restoration is ongoing, backup lines are often used).
For our part, we regulate the voltage: automatically – wherever it is technically possible, manually – in other cases. In parallel, we restore, repair and enhance equipment. The 2026 investment program amounts to almost UAH 1.8 bln. Within the framework of this year’s repair program, DTEK Dnipro Grids shall repair over 2,600 km of power lines and over 1,800 substations and distribution points in the Dnipropetrovsk region.
A standalone frequent cause of fluctuations is damaged or broken neutral wire in the building. In this case, a dangerous phase imbalance occurs: voltage can drop to 150 V on one phase and rise to 270–300 V or more on another. This is an emergency situation that poses a threat to appliances and requires immediate involvement of the managing company’s specialists.
What should the residents do
- After restoration of power supply, please switch on high-power appliances in turn, and not all at once.
- In most cases, the voltage stabilizes within 1–1.5 hours. If the fluctuations last longer – contact the homeowners association, housing cooperative or managing company to check the building’s internal networks.
- If internal networks are ok, house manager submits an inquiry to the Distribution System Operator. After that, DTEK Dnipro Grids specialists check external lines and eliminate the cause of malfunctions.
Important: DTEK Dnipro Grids is just one link in the general energy chain. The state of power generation and transmission nodes impact the level of voltage that comes into our grids. Therefore, even with maximum effort it is impossible to completely eliminate the problem on one’s own. All energy workers of the industry’s companies are currently working to improve the situation.